Polydex®
Bacteriostatic Algaecide kills algae
Also
kills chara, cyanobacteria (Blue-Green Algae) and E-Coli
Polydex
is absorbed by the algae where copper ions interfere with natural metabolic processes,
such as membrane permeability, respiration, digestion, reproduction, and even
denaturing of DNA. As a result algae die from their own ability to perform functions.
When the algae is under control keep a low dose of about .10 ppm and it will not
return. Not only do we have algae control but e-coli control at the same time.
Filamentous
algae is eliminated and controlled with Polydex. Polydex is specified for use
in potable waters. Follow applications guidelines to avoid danger to health or
wildlife. Safe for all fish except Koi and Carp species.
Polydex is sprayed
directly on to the algae and quickly kills algae. For best results combine the
Polydex treatment with applications of beneficial bacteria like Bacterius 1B or
5B to ensure the decaying algae materials do not accumulate in the pond and cause
more problems.
Polydex kills Escherichia coli; Zero C.F.U.
(colony forming units) after 1/2 day exposure.
Polydex kills Streptococcus faecalis; Zero C.F.U. (colony
forming units) after 2 days exposure.
Unlike
copper sulfate Polydex does not precipitate or stratify. It stays evenly
dispersed in water over a longer period continually preventing algae and bacteria
from multiplying. Polydex can be used in Municipal water supplies as a
source of potable water. Unlike other copper products Polydex does not need a
permit to use in most ponds but check first before ordering.
Available
in 4 liters, 10 liters, 20 liters, 115 liters and 208 liters
TELEPHONE
ORDERS & HELP DESK TEL: 450-243-0976
Polydex® Bacteriostatic
Algaecide
TECHNICAL
BULLETIN
What is Polydex?Polydex is a bacteriostatic algaecide
for the control of algae and bacteria in water-holding containments, such as agriculture
dugouts, municipal potable water impoundments, golf course ponds, and ornamental
waterscapes. Polydex was the first environment-friendly non-halogen, non-oxidizing
product to provide faster, more effective, and longer-lasting algae control in
potable water and wastewater storage.
Why
is Polydex different?Polydex
is a highly biologically active ionized mineral matrix, which effectively
stabilizes copper ions [Cu(H2O)6]2+ and disperses
them evenly throughout water. Greater
concentrations of ions - Lower
required doses
- Higher
efficacy
- Most
biologically active form
- Works
in a range of water conditions
Polydex
is strongly hydrophilic in nature. Therefore, it self-disperses quickly in clean
water (~6 meters/hr in all directions). Polydex remains in a state of high molecular
stability. The active ingredient remains in an ionic state indefinitely in a wide
range of water conditions. Polydex will always be uniformly distributed throughout
the water body, regardless of seasonal temperatures or water condition.
How
does Polydex work?
Polydex works on organisms in entirely different way
than chlorine and similar products. Halogens and oxidizers attack micro-organisms
from the outside. They “burn” them out of existence.Algae absorb Polydex, where
copper ions interfere with natural metabolic processes, such as membrane permeability,
respiration, digestion, reproduction, metalloenzyme function, and even the denaturing
of DNA. As a result, the algae die from their inability to perform vital functions.
Once Polydex has cleared a water body of algae, the unused active ingredient remains
in the water, effectively rendering the entire water body bacteriostatic. This
prevents algae from returning as long as there is a minimum residual.
What
can you expect?
In ponds where there is an existing algal bloom, expect
to use Polydex in proportion to the demand for copper needed to kill the bloom.
After applying Polydex, algae at the surface may appear to turn brown – and may
exhibit a foaming activity as resident bacteria digest the dead algae. This is
short lived and the water should clear in a matter of days.in clear water, there
will be no visual change and, when properly maintained, the water will remain
free from algae.
To Control Algae in Impounded Water, Lakes, Ponds,
and Reservoirs
Probably the simplest and most satisfactory method is to
pre-dilute Polydex in water and spray the solution over the body of water. A small
pump mounted in the boat can be easily used for this purpose.Polydex may be broadcast
directly on the water surface from a properly equipped boat. When using this method,
the wind direction is an important factor. Do not use this method unless completely
familiar with this type of application.
Application Method when Dosing
Polydex from a Boat
Begin
treatment along the shoreline and proceed outward until one-third to one-half
of the total area has been treated. Care should be taken that the course of the
boat is such as to cause even distribution of Polydex. In large lakes, it is customary
for the boat to travel in parallel lines about 20 – 100 feet (6 – 30 meters) apart.
Polydex
Dilutions (Equivalent Copper ppm) for Freshwater Algae
Use the lower recommended
rate in soft waters (less than 50 ppm methyl orange alkalinity) and higher concentration
in hard water (above 50 ppm alkalinity). Always consult local authorities before
applying this product to municipal waters
Top of page
©1999-2008
CanadianPond.ca Products Ltd.
TELEPHONE
ORDERS & HELP DESK TEL: 450-243-0976 |
